Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Billing Slabs:

Criteria :

  1. connection type

  2. building type

  3. calculation attribute

  4. property usage type

The combination of the above can be used to define the billing slab. Billing Slab is defined in mdms under sw-services-calculation folder with the SCBillingSlab. The following is the sample slab.

Code Block
{
  "tenantId": "pb",
  "moduleName": "sw-services-calculation",
  "SCBillingSlab": [
    {
      "id": "1",
      "buildingType": "RESIDENTIAL",
      "calculationAttribute": "No. of water closets",
      "connectionType": "Non Metered",
      "minimumCharge": 0,
      "slabs": [
        {
          "from": 0,
          "to": 1000000000,
          "charge": 15
        }
      ]
    },
    {
      "id": "2",
      "buildingType": "RESIDENTIAL",
      "calculationAttribute": "No. of toilets",
      "connectionType": "Non Metered",
      "minimumCharge": 0,
      "slabs": [
        {
          "from": 0,
          "to": 1000000000,
          "charge": 15
        }
      ]
    },
    {
      "id": "3",
      "buildingType": "NONRESIDENTIAL",
      "calculationAttribute": "No. of water closets",
      "connectionType": "Non Metered",
      "minimumCharge": 0,
      "slabs": [
        {
          "from": 0,
          "to": 1000000000,
          "charge": 30
        }
      ]
    },
    {
      "id": "4",
      "buildingType": "NONRESIDENTIAL",
      "calculationAttribute": "No. of toilets",
      "connectionType": "Non Metered",
      "minimumCharge": 0,
      "slabs": [
        {
          "from": 0,
          "to": 1000000000,
          "charge": 30
        }
      ]
    },
    {
      "id": "5",
      "buildingType": "Commercial",
      "calculationAttribute": "No. of water closets",
      "connectionType": "Non Metered",
      "minimumCharge": 0,
      "slabs": [
        {
          "from": 0,
          "to": 1000000000,
          "charge": 30
        }
      ]
    },
    {
      "id": "6",
      "buildingType": "Commercial",
      "calculationAttribute": "No. of toilets",
      "connectionType": "Non Metered",
      "slabs": [
        {
          "from": 0,
          "to": 1000000000,
          "charge": 30
        }
      ]
    },
    {
      "id": "7",
      "buildingType": "Government",
      "calculationAttribute": "No. of water closets",
      "connectionType": "Non Metered",
      "slabs": [
        {
          "from": 0,
          "to": 1000000000,
          "charge": 30
        }
      ]
    },
    {
      "id": "8",
      "buildingType": "Government",
      "calculationAttribute": "No. of toilets",
      "connectionType": "Non Metered",
      "slabs": [
        {
          "from": 0,
          "to": 1000000000,
          "charge": 30
        }
      ]
    },
    {
      "id": "9",
      "buildingType": "Partly Commercial",
      "calculationAttribute": "No. of water closets",
      "connectionType": "Non Metered",
      "slabs": [
        {
          "from": 0,
          "to": 1000000000,
          "charge": 25
        }
      ]
    },
    {
      "id": "10",
      "buildingType": "Partly Commercial",
      "calculationAttribute": "No. of toilets",
      "connectionType": "Non Metered",
      "slabs": [
        {
          "from": 0,
          "to": 1000000000,
          "charge": 25
        }
      ]
    },
    {
      "id": "11",
      "buildingType": "RESIDENTIAL",
      "calculationAttribute": "Flat",
      "connectionType": "Non Metered",
      "minimumCharge": 100,
      "slabs": []
    },
    {
      "id": "12",
      "buildingType": "NONRESIDENTIAL",
      "calculationAttribute": "Flat",
      "connectionType": "Non Metered",
      "minimumCharge": 250,
      "slabs": []
    },
    {
      "id": "13",
      "buildingType": "Commercial",
      "calculationAttribute": "Flat",
      "connectionType": "Non Metered",
      "minimumCharge": 250,
      "slabs": []
    },
    {
      "id": "14",
      "buildingType": "Government",
      "calculationAttribute": "Flat",
      "connectionType": "Non Metered",
      "minimumCharge": 350,
      "slabs": []
    },
    {
      "id": "15",
      "buildingType": "Partly commercial",
      "calculationAttribute": "Flat",
      "connectionType": "Non Metered",
      "minimumCharge": 200,
      "slabs": []
    }
  ]
}

If all criteria will match for that sewerage connection this slab will use for calculation.

Estimation:

For application one-time fee, the estimation will return all the related tax head based on criteria. For estimation, all configuration is present in ws-services-calculation.

  1. FeeSlab.json

  2. PlotSizeSlab.json

  3. RoadType.json

All the above master configuration is used for estimation.

Following are the exemptions and taxes that are calculated:

  • Form fee

  • Scrutiny fee

  • Meter charge (For metered connection)

  • Other charges

  • Road cutting charges

  • One time fee

  • Security charges

  • Tax and cess

Sewerage Charge and Tax:

Sewerage charge is based on billing slab, for sewerage application charge will be based on slab and tax based on master configuration.

Interest:

Below is a sample of master data JSON for interest :

Code Block
{
  "tenantId": "pb",
  "moduleName": "sw-services-calculation",
  "Interest": [
    {
      "rate": 5,
      "minAmount": null,
      "applicableAfterDays":0,
      "flatAmount": null,
      "maxAmount": null,
      "fromFY": "2019-20",
      "startingDay": "1/01/2019"
    }
  ]
}

Penalty:

Below is a sample of master data JSON for penalty :

Code Block
{
  "tenantId": "pb",
  "moduleName": "sw-services-calculation",
  "Penalty": [
    {
      "rate": 10,
      "minAmount": null,
      "applicableAfterDays": 0,
      "flatAmount": null,
      "fromFY": "2019-20",
      "startingDay": "1/01/2019"
    }
  ]
}

Round Off:

If the fraction is greater than equal to 0.5 the number is round up else it’s round down. eg: 100.4 will be rounded to 100 while 100.6 will be rounded to 101.

Demand Generation:

Once sewerage is sent to calculator it’s tax estimates are calculated. Using this tax head estimates demand details are created. For every tax head, estimate demand generates function will create a corresponding demand detail.

Whenever _calculate API is called demand is first searched based on the connection no or application no and the demand from and to period. If demand already exists the same demand is updated else new demand is generated with consumer code as connection no or application no and demand from and to a period equal to financial year start and end period.

In case of the update if the tax head estimates change, the difference in amount for that tax head is added as new demand detail. For example, if the initial demand has one demand detail with SEWERAGE_CHARGE equal to 120

Code Block
"demandDetails": [
                {
                    "id": "77ba1e93-a535-409c-b9d1-a312c409bd45",
                    "demandId": "687c3176-305b-461d-9cec-2fa26a30c88f",
                    "taxHeadMasterCode": "WATER_CHARGE",
                    "taxAmount": 120,
                    "collectionAmount": 120,
                    "additionalDetails": null,
                    "auditDetails": {
                        "createdBy": "04956309-87cd-4526-b4e6-48123abd4f3d",
                        "lastModifiedBy": "04956309-87cd-4526-b4e6-48123abd4f3d",
                        "createdTime": 1583675275873,
                        "lastModifiedTime": 1583675298705
                    },
                    "tenantId": "pb.amritsar"
                }
            ],

After updating if the SEWERAGE_CHARGE increases to 150 we add one more demand detail to account for the increased amount. The demand detail will be updated to:

Code Block
"demandDetails": [
                {
                    "id": "77ba1e93-a535-409c-b9d1-a312c409bd45",
                    "demandId": "687c3176-305b-461d-9cec-2fa26a30c88f",
                    "taxHeadMasterCode": "SEWERAGE_CHARGE",
                    "taxAmount": 120,
                    "collectionAmount": 0,
                    "additionalDetails": null,
                    "auditDetails": {
                        "createdBy": "04956309-87cd-4526-b4e6-48123abd4f3d",
                        "lastModifiedBy": "04956309-87cd-4526-b4e6-48123abd4f3d",
                        "createdTime": 1583675275873,
                        "lastModifiedTime": 1583675298705
                    },
                    "tenantId": "pb.amritsar"
                },
                {
                    "id": "0d83f4b0-6442-11ea-bc55-0242ac130003 ",
                    "demandId": "687c3176-305b-461d-9cec-2fa26a30c88f",
                    "taxHeadMasterCode": "SEWERAGE_CHARGE",
                    "taxAmount": 30,
                    "collectionAmount": 0,
                    "additionalDetails": null,
                    "auditDetails": {
                        "createdBy": "04956309-87cd-4526-b4e6-48123abd4f3d",
                        "lastModifiedBy": "04956309-87cd-4526-b4e6-48123abd4f3d",
                        "createdTime": 1583675275873,
                        "lastModifiedTime": 1583675298705
                    },
                    "tenantId": "pb.amritsar"
                }
            ],

RoundOff is bill based i.e every time bill is generated round off is adjusted so that payable amount is the whole number. Individual SW_ROUNDOFF in demand detail can be greater than 0.5 but the sum of all SW_ROUNDOFF will always be less than 0.5.