Introduction
All the Building plan approval Schemes and sub-schemes which are for the benefits of the citizens need to be available in the system. Therefore, town planning schemes template needs to be filled.
Data Table
Sr. No. | BPA Scheme* | Occupancy Type* |
---|---|---|
1 | DTP Scheme for Ward No. 1 | Residencial |
2 | DTP Scheme for Ward No. 1 | Commercial |
3 | DTP Scheme for Ward No. 7 | Commercial |
Note: The records in the above table are sample entries.
Procedure
Data Definition
Field(s) Description :
Sr.No.: Defines the serial no of the line item.
BPA Scheme: Name of the schemes available at a ULB/state level. This needs to be provided and uploaded into the system so that the same can be applied immediately while processing the permit.
Occupancy Type: Name provided for occupancy type which is used to configure in the OBPAS module.
Steps to fill data
Identify the “Schemes” that exists at a ULB/ State level.
Collect the above information and feed it in the “BPA Scheme” column accordingly.
Add the “Occupancy Type” respectively against the identified BPA Scheme(s).
Validations
All the fields with * sign are mandatory to be filled in. Without this information, the system configurations cannot be executed.
A “single entry” should be made against the respective column. In the case of multiple entries, continuation must be followed.
Attachments
Town planning Scheme Template
View file | ||
---|---|---|
|
Town planning Scheme Sample
View file | ||
---|---|---|
|