Introduction
Data Table
...
Sr. No | Account detail type* | Name* | Code* | Narration |
|---|---|---|---|---|
1 | ||||
2 | ||||
3 |
Note: Data given in the table is a sample data.
Procedure
Data Definition
Sr No |
|---|
...
Column Name | Data Type | Data Size | Is Mandatory? | Definition/ Description | |
|---|---|---|---|---|---|
Steps to fill data
...
Identify all the Departments that exists at a State level.
Download both the attached template and to updated all the details as per the above information in the empty template provided. The sample data template can be used as a reference to fill in the data.
Read through all the information above before updating the template with relevant information.
Validations
...
Download the workflow template attached to this page.
Have it open and go through all the headers and understand the meaning of them by referring 'Data Definition' section.
Make sure all the headers, its data type, field size and its definition/ description is understood properly. In case of any doubt, please reach out to the person who has shared this document with you to discuss the same and clear out the doubts.
Identify all sub ledgers details.
Start filling the data starting from serial no. and complete a record at once. repeat this exercise till the entire data is filled into a template.
Verify the data once again by going through the checklist and taking care of each and every point mentioned in the checklist.
Checklist
The checklist is a set of activities to be performed once the data is filled into a template to ensure data type, size, and format of data is as per the expectation. These activities have been divided into 2 groups as given below.
Common Checklist
This checklist covers all the activities which are common across the entities.
Sr. No | Checklist Parameter | Example |
|---|---|---|
1 | Make sure that each and every point in this reference list has been taken care of. |
Entity Specific Checklist
This checklist covers the activities which are specific to the entity.