Introduction

These are a list of sub occupancy as prescribed in the national bye-law (http://mohua.gov.in/upload/uploadfiles/files/Chap-4.pdf). These are used to configure sub occupancy in the OBPS module which has been described in the table below. Sub occupancy is defined under building occupancy typeBuilding Sub Occupancy details refer to sub-categorization of primary occupancy types. For instance, residential buildings can be further classified as apartments or old age homes depending on the specific usage of the buildings. Refer to the National Bye-Laws to view the prescribed list of sub-occupancy types.

Data Table

Note: The above table contains sample data for reference.

Procedure

Data Definition

Steps to fill data

1. Download the data template attached to this page.

2. Refer to the ‘Data Definition’ section of this document for more details on data type, size, and definitions.

3. Contact the person who shared this template with you to discuss and clear your doubts.

4. Enter a Sub Occupancy Code.

5. Enter the relevant Sub Occupancy Name.Verify the data

6. once again by going through the checklist and making sure that each and every point mentioned in the checklist is coveredSelect the relevant Occupancy Code. This will map the Sub Occupancy type to the selected Occupancy type.

Checklist

The checklist is a set of activities to be performed one the data is filled into a template to ensure data type, size, and format of data is as per the expectationentry requirements are met. These activities have been divided into 2 groups as given below.

Common Checklist

This checklist covers all the activities which are common across the entities.

Entity Specific Checklist

Not ApplicableSeparate Entity Specific Checklist is not required for this module data.

Attachments