Introduction
The Construction Type refers to the list of Building construction types in the ULB limits considered for tax calculation.
DIGIT Property Tax system has certain pre-defined categories namely :
Pucca
Semi Pucca
Kuccha
Data
...
Table
Sr. No. | Construction Type Code* | Construction Type |
...
* (In English) |
...
Construction Type |
...
* (In Local Language) |
...
1 |
...
PUCCA | Pakka Building With R.C.C. Roof or R.B. Roof | पक्का भवन, आर0सी0सी0छत या आर0बी0 छत सहित |
2 |
...
SEMIPUCCA | Any Other Pakka Building | अन्य पक्का भवन | |
3 | KUCCHA | Kuccha building that is all other building not covered in clauses (a) and (b) | कच्चा भवन अर्थात समस्त अन्य भवन जो (एक) और (दो) में अच्छादित नही है |
Note: The data described in the above table is a sample.
Procedure
...
Sr. No |
...
. | Column Name | Data Type | Data Size | Is Mandatory? | Description |
1 | Construction Type Code | Alphanumeric | 64 | Yes | Unique Identifier for Construction Type as defined in the Property Master. |
2 | Construction Type |
...
( In English) |
...
Text | 256 | Yes | Nomenclature of “Construction Type” in English. | |
3 | Construction Type |
...
(In Local Language) |
...
Text | 256 | Yes | Nomenclature of “Construction Type” in the local language as Telugu, Hindi etc. |
Steps to fill data
Identify the “Construction Types” that exists at a ULB/ State level.
Add the “Construction Type Code” respectively.
The format of the Construction Type Code will either be predefined or can be a continuous numeric/ alphanumeric sequence as per the requirement.
The predefined format of the Construction Type Code only must be used and not any random code.
Add description to the Construction Type Name, as per the required language.
Validations
All the fields with * sign are mandatory to be filled in. Without this information, the system configurations cannot be executed.
A “single entry” should be made against the respective column. Incase of multiple entries, continuation must be followed.
The “Construction Type Name” must be provided in the required language as mentioned against the respective column.
The format of the Construction Type Code must be informed to the individual/team responsible for filling in the master data.
Attachments
...
Download the data template attached to this page.
Refer to the ‘Data Definition’ section of this document to understand the headers in the template sheet, their data type, size, and definitions.
Reach out the person who shared the template for further details or to clear your doubts. Identify if the State/ULB has a provision for capturing pipe size for connections.
Identify the construction types applicable and fill into given template.
Go through the checklist to verify the data. Make sure that each and every point mentioned in the checklist is covered.
Checklist
The checklist is a set of activities to be performed once the data is filled into a template to ensure data type, size, and format of data is as per the expectation. These activities have been divided into 2 groups as given below.
Common Checklist
This checklist covers all the activities which are common across the entities.
Sr. No. | Checklist Parameter | Example |
|---|---|---|
1 | Make sure that each and every point in this reference list has been taken care of. |
Entity Specific Checklist
There is no checklist applicable separately to this entity.
Attachments
...
...
...