Introduction
The Property Sub Type represents 2nd level classification to the Property Type and provide option to further classify the property type in sub types. For example property type ‘Built-up’ is further classified into Independent House, A Flat In Apartment and Half Constructed Half Open and considered differently on tax calculation procedure.
Data Table
Sr. No. | Property Sub Type Code* | Property Sub Type* (In English) | Property Sub Type* (In Local Language) | Property Type Code* |
|---|---|---|---|---|
1 | SHAREDPROPERTY | Flat / Part of the building | फ्लैट / भवन का हिस्सा | BUILTUP |
2 | INDEPENDENTPROPERTY | Independent House / Whole Building | स्वतंत्र घर / पूरी इमारत | BUILTUP |
Note: The data in the above table is sample data.
Procedure
Sr. No. | Column Name | Data Type | Data Size | Mandatory | Description |
1 | Property Type Code | Reference | 64 | Yes | Unique Identifier for Property Type as defined in the Property Master. This code represents the category that is being used to categorize the properties. |
2 | Property Sub Type Code | Reference | 64 | Yes | Unique Identifier for Property Sub Type which is used as a reference for child configuration mapping. |
3 | Property Type Description | Text | 256 | Yes | Nomenclature of “Property Type” in English. |
4 | Property Type (In Local Language) | Text | 256 | Yes | Nomenclature of “Property Type” in local language as Telugu, Hindi etc. |
Steps to fill data
Download the data template attached to this page.
Get a good understanding of all the headers in the template sheet, their data type, size, and definitions by referring to the ‘Data Definition’ section of this document.
In case of any doubt, please reach out to the person who has shared this template with you to discuss and clear your doubts.
Identify the “Property Sub Types” that exists at a ULB/ State level.
Collect the above information and feed it below the “Property Sub Type ” column accordingly.
Add the “Property Sub Type Code” respectively against the identified trade type(s).
The predefined format of the Property Type Code only must be used from Property Type Master Sheet and not any random code. The respective mapping between Property Sub-Types & Property Types is defined by columns “ Property Sub Type Code” & “Property Type Code”.
Checklist
The checklist is a set of activities to be performed one the data is filled into a template to ensure data type, size, and format of data is as per the expectation. These activities have been divided into 2 groups as given below.
Common Checklist
This checklist covers all the activities which are common across the entities.
Sr. No. | Checklist Parameter | Example |
|---|---|---|
1 | Make sure that each and every point in this reference list has been taken care of. |
Entity Specific Checklist
This checklist covers the activities which are specific to the entity.
Sr. No. | Checklist Parameter | Example |
|---|---|---|
1 | The predefined format of the Property Sub Type Code only must be used and not any random code. |
Attachments
Configurable Data Template - Property Sub Type
(Refer to “Property Sub Type Fee” tab in the attached file).
Sample Configurable Data- Property Sub Type