Introduction

Fee Structure masters list contains the fee details applicable for processing specific services. All fee-related information collected by the authorities during the course of building plan approval is maintained in this masters.

Data Table

Sr No.	Service Type*	Application Type*	Application Subtype	Fee Subtype*	BPA Fees*	Amount*	Calculation Logic
1	new construction	PERMIT APPLICATION		application fee	Application Fees	50
2	new construction	PERMIT APPLICATION	Medium Risk	sanction fee	Additional Fees	0
3	new construction	PERMIT APPLICATION	Low Risk	application fee	Land Development Charges	50
4	new construction	OCCUPANCY CERTIFICATE	High Risk	sanction fee	Charges for Well	50

Note: The above table contains sample data for reference.

Procedure

Data Definition

Sr. No.	Column Name	Data Type	Data Size	Is Mandatory?	Description

Sr. No.	Column Name	Data Type	Data Size	Is Mandatory?	Description
1	Service type	Text	256	Yes	The type of OBPS service for which the fees is to be collected. Refer to the Data Table above for illustration
2	Application Type	Text	256	Yes	List of application types for which the fees are to be calculated. Refer to the Data Table above for illustration
3	Application Subtype	Text	56	No	Application subtype is mentioned here such as type of risk
4	Fee Subtype	Text	256	Yes	Type of fees so collected to be mentioned here. Refer to the Data Table above for illustration
5	BPA Fee	Text	56	Yes	The type of OBPS service for which the fees is to be collected. Refer to the Data Table above for illustration
6	Amount	Integer	6	Yes	Fee Amount collected is mentioned here. Refer to the Data Table above for illustration
7	Calculation Logic	Text	1024	No	Fees calculation logic if any is mentioned here

Steps to fill data

Download the data template attached to this page.
Refer to the ‘Data Definition’ section of this document to understand the headers in the template sheet, their data type, size, and definitions.
Reach out the person who shared the template for further details or to clear your doubts. Identify if the State/ULB has a provision for capturing pipe size for connections.
Identify the combination of attributes for with the fee is defined and then fill into the given template.
Go through the checklist to verify the data. Make sure that each and every point mentioned in the checklist is covered.

Checklist

The checklist is a set of activities to be performed one the data is filled into a template to ensure data entry requirements are met. These activities have been divided into 2 groups as given below.

Common Checklist

This checklist covers all the activities which are common across the entities.

Sr. No.	Checklist Parameter	Example

Sr. No.	Checklist Parameter	Example
1	Make sure that each and every point in this reference list has been taken care of	Checklist

Entity Specific Checklist

There is no separate entity-specific checklist for this entity.

Attachments

Fee Structure Template

2. Fee Structure Sample Data