Introduction
Buildings are classified based on occupancy types for obtaining the permission. These are used to configure Building occupancy types in the OBPS module which has been described in the table below.
Data Table
Sr. No. | Occupancy Code* | *Occupancy Name (In English) | *Occupancy Name (In Local Language) |
---|---|---|---|
1 | R1 | Residential | आवासीय |
2 | E1 | Educational | शैक्षिक |
3 | I1 | Institutional | संस्थागत |
Note : The records in above table are sample entries.
Procedure
Data Definition
Field(s) Description :
Sr.No.: Defines the serial no of the line item.
Occupancy Name (in the English Language): Name provided for occupancy name which is used to configure in the OBPAS module. Can be referred from National Bye-Law. (http://mohua.gov.in/upload/uploadfiles/files/Chap-4.pdf)
Occupancy Name: Occupancy Name in the local language. e.g. Hindi, Telugu, etc.
Occupancy Code: Unique Code provided with respect to occupancy name. It can be numeric and alphanumeric as well.
Steps to fill data
Identify the “Occupancy Type ” that exists at a ULB/ State level.
Priory, there are certain occupancy type which are already mentioned in the national bye-law (http://mohua.gov.in/upload/uploadfiles/files/Chap-4.pdf)
Collect the above information and feed it below the “Occupancy Name” column accordingly.
Add the “Occupancy Code” respectively against the identified Occupancy Name(s).
The format of the Occupancy Code will either be predefined or can be a continuous numeric/alphanumeric sequence as per the requirement.
Validations
All the fields with * sign are mandatory to be filled in. Without this information, the system configurations cannot be executed.
A “single entry” should be made against the respective column. In the case of multiple entries, continuation must be followed.
The code can be alphanumeric as provided by the state
Attachments
Template Occupancy
Sample Occupancy