Introduction
The Construction Type refers to the categories required, to define the type of construction over a piece of land.
DIGIT Property Tax system has certain pre-defined categories namely :
Pucca
Semi Pucca
Kuccha
Data Definition
Sr. No. | Construction Type Code* | Construction Type Name (English)* | Construction Type Name (Hindi)* |
1 | PUCCA | Pakka Building With R.C.C. Roof or R.B. Roof | पक्का भवन, आर0सी0सी0छत या आर0बी0 छत सहित |
2 | SEMIPUCCA | Any Other Pakka Building | अन्य पक्का भवन |
3 | KUCCHA | Kuccha building that is all other building not covered in clauses (a) and (b) | कच्चा भवन अर्थात समस्त अन्य भवन जो (एक) और (दो) में अच्छादित नही है |
Note: The data described in the above table is a sample.
Procedure
Data Definition(s)
Sr.No: Defines the serial no of the line item.
Construction Type Code: Unique Identifier for Construction Type as defined in the Property Master.
Construction Type Name ( In English): Nomenclature of “Construction Type” in English.
Construction Type Name (In Local Language): Nomenclature of “Construction Type” in the local language as Telugu, Hindi etc.
Steps to fill data
Identify the “Construction Types” that exists at a ULB/ State level.
Add the “Construction Type Code” respectively.
The format of the Construction Type Code will either be predefined or can be a continuous numeric/ alphanumeric sequence as per the requirement.
The predefined format of the Construction Type Code only must be used and not any random code.
Add description to the Construction Type Name, as per the required language.
Validations
All the fields with * sign are mandatory to be filled in. Without this information, the system configurations cannot be executed.
A “single entry” should be made against the respective column. Incase of multiple entries, continuation must be followed.
The “Construction Type Name” must be provided in the required language as mentioned against the respective column.
The format of the Construction Type Code must be informed to the individual/team responsible for filling in the master data.
Attachments
Following is the blank template for Construction Type
Refer to “Construction Type Tab” in the uploaded template. This consists of sample data for reference.