Introduction
The first level of classification of a property based on its construction is defined as Property Type. Generally, the property is divided into two types :
Built-up
Vacant Land.
Data Definition
Sr. No. | Property Type Code* | Property Type* (In English) | Property Type* (In Local Language) |
1 | BUILTUP | Built-Up | निर्माण |
2 | VACANT | Vacant Land | खाली जमीन |
Note: The data described in the above table is a sample.
Procedure
Data Definition(s)
Sr.No: Defines the serial no of the line item.
Property Type Code: Unique Identifier for Property Type as defined in the Property Master. This code represents the category that is being used to categorize the properties.
Property Type Description ( In English): Nomenclature of “Property Type” in English.
Property Type (In Local Language): Nomenclature of “Property Type” in local language as Telugu, Hindi etc.
Steps to fill data
Identify the “Property Types” that exists at a ULB/ State level.
Collect the above information and feed it below the “Property Type Description” column accordingly.
The Description of Property Type must be provided as per the language specified in the respective column.
Add the “Property Type Code” respectively against the identified Property Type(s).
The format of the Property Type Code will either be predefined or can be a continuous numeric/ alphanumeric sequence as per the requirement.
The predefined format of the Property Type Code only must be used and not any random code.
Validations
All the fields with * sign are mandatory to be filled in. Without this information, the system configurations cannot be executed.
A “single entry” should be made against the respective column. Incase of multiple entries, continuation must be followed.
The “Property Type” must be provided in the required language as mentioned against the respective column.
The format of the Property Type Code must be informed to the individual/team responsible for filling in the master data.
Attachments
Following is the blank template for Property Type
Refer to “Property Type Tab” in the uploaded template. This consists of sample data for reference.