Introduction

Buildings are classified based on occupancy and types of construction. These are used to configure the OBPS module which has been described in the table below.

Data Table

• *Mandatory Field.

Procedure

Data Definition

1. Field(s) Description :

   • Sr.No.: Defines the serial no of the line item.

   • Occupancy Name: Name provided for occupancy name which is used to configure the OBPAS module. Can be referred from National Bye-Law

   • Occupancy Name: Occupancy Name in the local language. e.g. Hindi, Telugu, etc.

   • Occupancy Code: COde provided in respect to occupancy name. It can be numeric and alphanumeric as well.

Steps to fill data

• Identify the “Occupancy Type ” that exists at a ULB/ State level.

  • Priorly, there are certain occupancy type which are already mentioned in the national bye-law (http://mohua.gov.in/upload/uploadfiles/files/Chap-4.pdf)

• Collect the above information and feed it below the “Occupancy Name” column accordingly.

• Add the “Occupancy Code” respectively against the identified Occupancy Name(s).

  • The format of the Occupancy Code will either be predefined or can be a continuous numeric/alphanumeric sequence as per the requirement.

Validations

• All the fields with * sign are mandatory to be filled in. Without this information, the system configurations cannot be executed.

• A “single entry” should be made against the respective column. In case of multiple entries, continuation must be followed.

• The code can be alphanumeric as provided by the state

Do’s and Don'ts

NA

Attachments

Template Occupancy

Sample Occupancy