Introduction
All the Building plan approval Schemes and sub-schemes which are for the benefits of the citizens need to be available in the system. Therefore, town planning schemes template needs to be filled.
Data Table
Sr. No. | BPA Scheme* | Occupancy Name* |
---|---|---|
1 | DTP Scheme for Ward No. 1 | Residential |
2 | DTP Scheme for Ward No. 1 | Commercial |
3 | DTP Scheme for Ward No. 7 | Commercial |
Note: The records in the above table are sample entries.
Procedure
Data Definition
Sr. No. | Column Name | Data Type | Data Size | Mandatory | Description |
---|---|---|---|---|---|
1 | BPA Scheme | Text | 256 | Yes | Name of the schemes available at a ULB/state level. This needs to be provided and uploaded into the system so that the same can be applied immediately while processing the permit. |
2 | Occupancy Name | Text | 64 | Yes | Name provided for occupancy type which is used to configure in the OBPAS module. |
Steps to fill data
Identify the “Schemes” that exists at a ULB/ State level.
Collect the above information and feed it in the “BPA Scheme” column accordingly.
Add the “Occupancy Name” respectively against the identified BPA Scheme(s).
Checklist
The checklist is a set of activities to be performed one the data is filled into a template to ensure data type, size, and format of data is as per the expectation. These activities have been divided into 2 groups as given below.
Common Checklist
This checklist covers all the activities which are common across the entities.
Sr. No. | Checklist Parameter | Example |
---|---|---|
1 | Make sure that each and every point in this reference list has been taken care of. |
Entity Specific Checklist
Not Applicable