Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Introduction

Buildings are classified based on occupancy types subtypes and then its actual usage for obtaining permission. These are used to configure Building usage types in the OBPS module which has been described in the table below.

We can also refer to National Building Bye-law for understanding- http://mohua.gov.in/upload/uploadfiles/files/Chap-4.pdf

Data Table

Sr. No.

Usage Name*

Code (Usage)*

Sub occupancy*

1

Apartment type

A-AF-AH

Apartment/Flat

2 

Family residential

A-AF-FR

 Apartment/Flat

3 

Residential flat

A-AF-RF

Apartment/Flat

Note: The records in the above table are sample entries.

Procedure

Data Definition

Field(s) Description :

  1. Sr.No.: Defines the serial no of the line item.

  2. Usage Name: Name provided for Building usage name which is used to configure in the OBPAS module. Can be referred from National Bye-Law. (http://mohua.gov.in/upload/uploadfiles/files/Chap-4.pdf)

  3. Usage Code: Unique Code provided with respect to usage name. It can be alphabetical, numeric, and alphanumeric as well.

  4. Sub Occupancy: This column should have names of the sub occupancy type.

Steps to fill data

  1. Identify the “Usage type ” that exists at a ULB/ State level.

  2. Priory, there are certain Usage type which are already mentioned in the national bye-law (http://mohua.gov.in/upload/uploadfiles/files/Chap-4.pdf)

  3. Collect the above information and feed it below the “Usage Name” column accordingly.

  4. Add the “Usage Code” respectively against the identified Usage type Name(s).

  5. The format of the Occupancy Code will either be predefined or can be a continuous numeric/alphanumeric sequence as per the requirement.

  6. Fill up the sub occupancy column accordingly.

Validations

  1. All the fields with * sign are mandatory to be filled in. Without this information, the system configurations cannot be executed.

  2. A “single entry” should be made against the respective column. In the case of multiple entries, continuation must be followed.

  3. The code can be alphanumeric as provided by the state

Dos and Don'ts

Filling up information of sub occupancy is really important to create a ling between the occupancy, sub occupancy, and usage type.

Attachments

Usage Type template

Usage type Sample Data

  • No labels