Introduction

The first level of classification of a property based on its construction is defined as Property Type. Generally, the property is divided into two types :

• Built-up

• Vacant Land.

Note: Mostly these property type are fixed and commonly used in all the ULBs across the country. Hence this data is not needed anymore in the template.

Data Table

Note: The data described in the above table is a sample.

Procedure

Steps to fill data

1. Download the data template attached to this page.

2. Get a good understanding of all the headers in the template sheet, their data type, size, and definitions by referring to the ‘Data Definition’ section of this document.

3. In case of any doubt, please reach out to the person who has shared this template with you to discuss and clear your doubts.

4. Identify the “Property Types” that exists at a ULB/ State level.

5. Collect the above information and feed it below the “Property Type Description” column accordingly. The Description of Property Type must be provided as per the language specified in the respective column.

6. Add the “Property Type Code” respectively against the identified Property Type(s).

Checklist

The checklist is a set of activities to be performed once the data is filled into a template to ensure data type, size, and format of data is as per the expectation. These activities have been divided into 2 groups as given below.

Common Checklist

This checklist covers all the activities which are common across the entities.

Entity Specific Checklist

There is no separate checklist applicable to this entity.

Attachments