Introduction

Functions shall represent the various functions or services carried out by the ULBs. Functions are provided through various responsibilities centers called Departments.

Functions of the ULB can have three levels within it.

First level under this group represent various functions both obligatory and discretionary. Identified as 0 in the template.
Second Level in function would represent the particular type of service under a function,
known as “Function Description”. Identified as 1 in the template
Third level will represent a particular cost center, Known as “Cost Centre”, which
provides the service. Identified as 2 in the template.

Data Table

*Sr. No.	*Name	*Code	*Level	Parent Type	Parent Code

*Sr. No.	*Name	*Code	*Level	Parent Type	Parent Code
1	General Administration	10	0	Nil	Nil
2	GENERAL ADMINISTRATION:Administration	1011	1	General Administration	10
3	General Department	101100	2	GENERAL ADMINISTRATION:Administration	1011
4	Public Works	20	0	Nil	Nil
5	PUBLIC WORKS:Roads and Pavement	2021	1	Public Works	20
6	Roads and Building Maintenance	202101	2	PUBLIC WORKS:Roads and Pavement	2021

Note: Data given in the table is a sample data.

Procedure

Data Definition

Sr No	Column Name	Data Type	Data Size	Is Mandatory?	Definition/ Description

Sr No	Column Name	Data Type	Data Size	Is Mandatory?	Definition/ Description
1	Name	Text	250	Yes	To indicate the Function name, User can select a particular function code while recording a transaction in the system. This will facilitate in generating a report at the function level.
2	Code	Alphanumeric	50	Yes	The unique code give to the individual function. Child functions has to follow number pattern starting with the parent code.
3	Level	Numeric	50	Yes	As per NMAM the Function can be defined in the tree structure, so the Level indicates the structure in which the function would be setup. Root nodes will be level 0 and the next level funds will have value as 1 and the next level as value 2.
4	Parent Type	Text	250	No	If the ULB’s using multiple Functions then a Hierarchy of “Parent - Child “can be setup for the Function, so under each Parent Function a multiple child function can be setup.
5	Parent Code	Alphanumeric	50	No	The unique code representing the parent type function.

Steps to fill data

Download the data template attached to this page.
Have it open and go through all the headers and understand the meaning of them by referring 'Data Definition' section.
Make sure all the headers, its data type, field size and its definition/ description is understood properly. In case of any doubt, please reach out to the person who has shared this document with you to discuss the same and clear out the doubts.
Identify all different types of Function in the ULB..
Start filling the data starting from serial no. and complete a record at once. repeat this exercise till the entire data is filled into a template.
Verify the data once again by going through the checklist and taking care of each and every point mentioned in the checklist.

Checklist

The checklist is a set of activities to be performed once the data is filled into a template to ensure data type, size, and format of data is as per the expectation. These activities have been divided into 2 groups as given below.

Common Checklist

This checklist covers all the activities which are common across the entities.

Sr. No	Checklist Parameter	Example

Sr. No	Checklist Parameter	Example
1	Make sure that each and every point in this reference list has been taken care of.	Checklist

Entity Specific Checklist

This checklist covers the activities which are specific to the entity.

Sr. No.	Checklist Parameter	Example

Sr. No.

Checklist Parameter

Example

1

The Function Name should not contain any special characters

General Administration : [Allowed]

#General Administration! : [Not allowed]

2

The Function Code that are defined by the state team should be alphanumeric and Unique.

10, 1011 or 101100

Attachments

Configuration data template - Function

Sample configuration data - Function