Introduction
Roads are constructed in order to facilitate the locomotion of people from a place to another.
The roads constructed in a state are classified into certain categories which could be on the basis width, its height or the place where it is being constructed.
These road types configuration is needed for DIGIT module in order to describe the property and what are the taxes it could be attract.
Data Table
Below is the table in which the data is to be collected:
Sr. No* | Road Type Code* | Description (in English)* | Description (in native language) |
1 | RD1 | Less than 12 meters in width | 12 मीटर से कम चौड़ाई वाले मार्ग पर |
2 | RD2 | From 12 meters to 24 meters in width | 12 मीटर से 24 मीटर तक की चौड़ाई वाले मार्ग पर |
3 | RD3 | More than 24 meters in width | 24 मीटर से अधिक की चौड़ाई वाले मार्ग पर |
*Mandatory Columns
Please note that the values mentioned in the data table are sample values and the states are free to add/update according to there requirements.
Procedure
Data Definition
Below is the definition of the columns which are required in the template:
Road Type Code : This is the smaller abbreviation of the road type being classified.
Description(in English): This describes the category of the road in English language.
Description(in Native language) : This describes the category of the road in the native language.
Steps
Firstly identify all the classifications of road types which are present in the state.
Secondly get the codes for that classification, if not present form the codes with abbreviated terms.
After which start filling the template with the proper codes and description.
Validations
No category can be left without a code.
Attachments
Below is the template for the road type: